Agotado
Estera de la cubierta del barco de la espuma de EVA del suelo del barco de la textura del diamante
Order in the next 6 hours 53 minutes to get it between undefined, 21st Abril and undefined, 5th Mayo
Description
Esta es una lámina de cubierta de espuma EVA de alta calidad para uso en cubiertas de botes o pisos de yates. Adopta un diseño autoadhesivo de pelar y pegar para una fácil instalación. Patrón similar a la teca y superficie antideslizante, es fácil de combinar con su barco y proteger el suelo.
NOTA: Los colores pueden tener diferencias debido a varios lotes. Permita un poco de error debido a la medición manual.
Material: espuma EVA
Texturas: textura de diamante
Color: dos colores
Dureza: 60
Modo de instalación: autoadhesivo al piso
Tamaño del producto: 74.8"x27.6" y 74.8"x13.8"
NOTA: Los colores pueden tener diferencias debido a varios lotes. Permita un poco de error debido a la medición manual.
Características
- Espuma EVA de alta calidad: este piso marino está hecho de una excelente espuma EVA, que es suave, inodoro, resistente a la intemperie y duradera. Y el aspecto moderno de teca sintética lo hace lujoso y hermoso.
- Superficie antideslizante: con el patrón y la zanja profunda organizada, este piso de EVA para botes está diseñado para que no resbale. Por lo tanto, no hay necesidad de preocuparse por resbalar al caminar sobre él.
- Uso conveniente: este bote de espuma está diseñado con autoadhesivo para su uso de bricolaje. Puede cortarlo fácilmente con un cuchillo o tijeras y pegarlo en pisos de diferentes formas.
- Fácil de instalar: el piso de la cubierta marina se instala sin esfuerzo. Simplemente limpie su piso, pele y pegue al piso, y presione con fuerza, y puede terminarlo usted mismo en unos minutos.
- Limpieza que ahorra mano de obra: limpie con aspiradora regularmente. El suelo del barco está diseñado para ser naturalmente a prueba de manchas. Puede limpiar la suciedad con un paño húmedo, no es necesario usar detergente para limpiar.
- Varias aplicaciones: este piso de teca para botes es un tapete de amplio uso adecuado para botes marinos, yates, limusinas, vehículos recreativos, piscinas, etc. Hará que su bote sea hermoso y cómodo.
Especificaciones
Material: espuma EVA
Texturas: textura de diamante
Color: dos colores
Dureza: 60
Modo de instalación: autoadhesivo al piso
Tamaño del producto: 74.8"x27.6" y 74.8"x13.8"
Estera de la cubierta del barco de la espuma de EVA del suelo del barco de la textura del diamante
Reviews
4.8
/5
24 reviews
5
20
4
4
3
0
2
0
1
0
Click to review:
Recent
10
Page 1
05/26/2024
OC
O******
Looks and works great!! Easy to install and holds on strong!!!
05/07/2024
AT
A******
Just finished the install. Seems like a good purchase so far but I guess only time will tell. Think the price could be a little cheaper due to having to waste a lot of it after cutting. Plus if you want it to look flushed you have to make some adjustments, not really room for errors. All in all I'll update after the summer months
04/05/2024
T
t******
IDE recommend this product. Shipped nicely and quickly. Adhered to the surface very well. Very pleased.
03/10/2024
X
X******
Nice product, very versatile and shipped quickly
02/23/2024
CM
C******
+2
So far, this product has been really great to work with. You do, however need to watch the lines as you’re laying it down if you’re splicing pieces together for a larger area. Where the roll's.themselves are cut perfectly 4 feet wide five however, long. They are not necessarily cut The same way as the previous sheet so this means that sheets cannot just button up to one another on the end or on the side without noticing you have spiced two sheets together. So when you’re laying down on a larger area, make sure you lay the sheets out first so you can see what adjustments you need to make in the edges of the sheets so that when it lays down , it looks seamless. Some of the joints may have to be fingered as shown and if so, it is critical that you use some kind of 3M adhesive spray just to ensure that the ends don’t curl up.
See more02/02/2024
MK
M******
Used on my paddle board build. It was easy to cut and install. Very strong adhesive and nice padding for the bare foot!
01/16/2024
PS
P******
This works and looks great for my center piece carpet. Easy to install
12/29/2023
ML
M******
I used this replace the covering (pics attached) on my boat trailer. It went down and stuck perfectly. Super easy to cut to fit. I will be getting more for my interior.
12/14/2023
JJ
J******
This item is a small package but big on quality. I was highly surprised at the outcome. Even though it was a learning curve for me; my family and I did a great job with the installation. I must say it came out quite nice.If I had to give any advice to better this product, I would say add pointers on how to instal it to make it look good for beginners. Especially this type because of all the angles to match up.Also give the pieces needed for certain sizes. Also add wider and longer sizes. This should start out at around 10ft x 6ft x 1/4 inch thick. I believe 1/4 inch thick is perfect but you need length out to at least 12-15 ft and as wide as 8ft. That way with a minimum of two and a half pieces you can finish a bass boat easily. I needed nine pieces to complete my boat that is crazy. My boat was 18ft x 6.5 ft. I ended up needed nine pieces to complete the small details.
See more11/20/2023
W
W******
+2
Bought a used sit-on ocean yak over 12 years ago and it has begun to look like it.This FOCEAN Boat Flooring helped me revamp it a bit.The flooring is super easy to cut, but a bit difficult to work with because it's so stiff.Also, because of the material and the ridges, it's difficult to trim neatly.I had to stop trimming for neatness because it would have gone on forever and still not been right.So the takeaway is that it really isn't designed for small, intricate cuts. Definitely for flooring.I set it out in the sun while I scrubbed the yak clean and prepped it for installation.I had to make some templates out of paper before cutting so there was little waste.In the pics you can see that the previous cushioning for the seat part is gone and the foam is off the foot rests.I put some of the foam on the seat area, the foot rest area and also on the flat part between. I like to SUP sometimes in the backwaters and that should make it more comfortable for standing.All that's left to do is to put in the holes for the scupper holes. Figured I'd wait until the flooring has ample time to set.IMO, it is still an improvement.We'll see how it holds up to the sea and salt. I'll update.Now all I need is time to actually use my yak!
See more