How to Remove Hjdeck Boat Flooring Adhesive?

After removing Hjdeck EVA foam marine flooring, removing the adhesive requires special care to avoid damaging the hull. Whether it's old glue left over from installation, tape residue, or a DIY repair, these boat-safe methods will help restore your deck's clean surface.

Step 1: Identify the Adhesive Type

Hjdeck boat flooring uses pressure sensitive adhesive (PSA), which is the type of adhesive often used with EVA foam flooring.

Step 2: Gentle Scraping

Use a plastic scraper or credit card to lift dried glue.
Avoid metal tools that could tear the foam.
For thick adhesive, carefully peel off loose sections first.

Step 3: Safe Adhesive Removal Methods

Hjdeck boat flooring sticks directly to most boats, and when you peel it off you can just clean the old adhesive with a soft cloth dipped in water.

Gently scrub, then rinse with fresh water.

For Stubborn Residue:

Isopropyl alcohol (70%) can break down sticky glue without harming EVA foam.
Dab lightly and wipe—don’t oversaturate the foam.

Step 4: Rinse & Dry

Rinse thoroughly with freshwater (especially important for boats).
Blot dry with a towel and allow to air dry completely.

Pro Tips & Warnings:

✔ Always test cleaners in inconspicuous area first
✔ Work in ventilated area when using solvents
✔ Never use acetone or paint thinners - can damage gelcoat
✔ Wear gloves and protective eyewear

Final Tips:

For preventive care, use marine-grade adhesives when reinstalling flooring.

Regular cleaning with mild soap + water helps maintain Hjdeck flooring.